Select Your Currency

Quickest, Smoothest gear changes with a Hm Quickshifter. Fast worldwide shipping!!

Shopping Cart

Hm Quickshifter Super Lite Kawasaki Zx-6R

Quick Overview

Hm Quickshifter Super Lite Kawasaki Zx-6R. This little unit packs a punch, there are no control units to set up or wonder where to place on your bike, all you need is this little linkage to experience the thrill of HM Quickshifter. It works by cutting the ignition for a millisecond at a time allowing for quick and seamless shifting under full throttle or partial throttle. Exhilarating, fun and continuous acceleration through the gears. For bike setup and shift rod length please refer to the Bike Setup and Specifications tab below.

Availability: In stock

Hm Quickshifter Motorcycle Quickshifter Australia Motorcycle Quickshifter Kits

Approx delivery times: Australia 2-5 Days, International 3-10 Days

Frequently Asked Questions | Install Guide | Setup and Settings

Shipping & Returns | Privacy Policy | Price Match Guarantee

* Required Fields

$449.99

Details

The HM Quickshifter SUPER LITE for Kawasaki Zx-6R is a PLUG and PLAY Quickshifter.

Key features of the HM Quickshifter SUPER LITE Kawasaki Zx-6R.

  • HM Quickshifters SUPER LITE is a through and through Strain Gauge quickshifter with our advanced ‘world beating’ digital signal processing. Nothing else outside of MotoGP uses this technology. Nothing is better and nobody except HM offers this outside MotoGP.
  • No moving parts means the HM Quickshifters SUPER LITE makes them virtually indestructible.
  • HM Quickshifters SUPER LITE is the kindest and gentlest way to treat your gearbox. HM uses the ignition side of the motorcycle to unload the gearbox, which is far kinder than most other designs.
  • HM Quickshifters SUPER LITE is a STAND ALONE PLUG and PLAY systems, integrated to the ignition side of the motorcycle as a quickshifter should be. No need for complex interfaces, no software glitches, no need for constant adjustments and no chance of interference to any other operational aspect of the motorcycle.
  • HM Quickshifter SUPER LITE  kills from the ignition side of the engine, so there is no chance of “extended” fuel burning, secondary injectors (which most modern sportbikes have) that are not shut off, or any other problems that might be associated with fuel side controls. Spark is dead, gearbox unloads and the HM initiates an ultra smooth, gentle and unquestionably the fastest gear change you can get.
  • Sensitivity on the HM Quickshifter SUPER LITE is controlled from the linkage itself , and you never have to deal with “interface problems” again.
  • Every HM Quickshifter SUPER LITE works in “up” and “down” shift pattern, No need to buy different parts to change your shift pattern and you will never have the wrong setup.
  • Every HM Quickshifter SUPER LITE is adjustable for lever sensitivity, so you can adjust for the specifics of your motorbike, gearbox and riding style.
  • HM Quickshifter SUPER LITE has 3 setting for sensitivity with a fixed ignition kill time, so you can control how you use the gearbox and how you want the HM Quickshifter to work / feel.
  • The HM Quickshifter SUPER LITE is transportable, meaning it can be used on many different machines by using the correct wiring loom and shift rod length required. The HM Quickshifter SUPER LITE can be reused over and over! Multiple bikes, changing bikes during the season or buying a new bike means you can bring your HM Quickshifter SUPER LITE with you to your different / new machine for none or very little added expense.
  • HM Quickshifter SUPER LITE wiring looms are “plug in and go.” No need to splice or cut in any way and no complications with other ECU’s. Straight bolt on application and clean removal if the time or need ever comes.

Strain Gauge Sensor has a diameter of only 16 mm and a length of 55 mm. It is possible to mount either M6 left or M6 right thread on both sides of the sensor and the same sensor can be used as pull or push version.

 

To determine the shift rod length required, please measure the rod only as per the last photo above. For example if that measurement is 200mm then you will be required to order a 150mm rod. Therefore once our sensor (50mm) and the shift rod supplied are mounted together the overall length as the current rod on your motorcycle will be the same. In this example 200mm. If your shift rod has 2 male ends, then measure between the 2 threaded sections only and likewise minus 50mm from that measurement.

 

Kawasaki ZX-6R , ZX-6RR, ZX-636 2000-2004

IMPORTANT NOTE: Please measure your shift rod, subtract 50mm for the PLUS sensor and purchase needed length(s).


Can work on a bike in standard form from the factory or a bike fitted with a Power Commander 3, V or Bazzaz unit or similar.


Kawasaki ZX-6R , ZX-6RR, ZX-636 2005-2006

IMPORTANT NOTE: If you have OEM setup you need to purchase a 90mm shift rod for use with the PLUS. All non-OEM setups please measure your shift rod, subtract 50mm for PLUS sensor and purchase needed length(s).

 

Can work on a bike in standard form from the factory or a bike fitted with a Power Commander 3, V or Bazzaz unit or similar.


Kawasaki ZX-6R , ZX-6RR, ZX-636 2007-2008

IMPORTANT NOTE: If you have OEM setup you need to purchase (2) 50mm shift rod for use with PLUS. All non-OEM setups please measure your shift rod, subtract 50mm for PLUS sensor and purchase needed length(s).


Kawasaki ZX-6R , ZX-6RR, ZX-636 2009-2012

IMPORTANT NOTE: If you have OEM setup you need to purchase a 115mm shift rod for use with the PLUS. All non-OEM setups please measure your shift rod, subtract 50mm for PLUS sensor and purchase needed length(s).


Can work on a bike in standard form from the factory or a bike fitted with a Power Commander 3, V or Bazzaz unit or similar.


Kawasaki ZX-6R , ZX-6RR, ZX-636 2013 onwards

IMPORTANT NOTE: If you have OEM setup you need to purchase a 90mm shift rod for use with the PLUS and a left hand brub screw. All non-OEM setups please measure your shift rod, subtract 50mm for PLUS sensor and purchase needed length(s).


Specifications Kawasaki ZX6R Hm Quickshifter Version

  • Minimum voltage 5.1v
  • Maximum voltage 16v
  • Maximum transient 60v
  • Current consumption
  • Output Max Current: 35A
  • LCD shock 3G (1G = 9.8m/s²)
  • LCD functional temp 0ºC to 80ºC
  • LCD maximum temp -20ºC to +90ºC
  • System functional temp -40ºC to +125ºC
  • NOTE: If the LCD is taken beyond its functional temp, it will not be readable but will recover after some settling time once it functional range is restored
  • Absolute Maximum Ratings
  • Maximum voltage 16V
  • Maximum load current 250mA
  • The Orange wire is effectively connected to 12v as supplied by the ECU, and the Grey wire is the 12v output from the shifter. During a SHIFT, the 12v feed to the Grey wire is interrupted for the duration of the Kill Time
Hm Quickshifter Install and Setup
  1. Excellent Review by Pocketpunch
    Bang for Buck
    Performance
    Quality Finish

    Looks great on the bike. Was a breeze to install. Simply kick your foot up to shift gears while being on power. Makes Street riding so easy to cut through gears while looking out for traffic. The quickshifter works best above 6k revs and at medium to high throttle load - just like clutchless upshifting. But you will never be able to clutchless upshift as fast as you can shift with the HM quickshifter. (Posted on 15/09/16)

  2. Great bang for your buck Review by zedsled
    Bang for Buck
    Performance
    Quality Finish

    Purchased a HM quickshifter about 3 months ago for my trackbike. Great item, easy to install and works like a charm. Definitely makes a difference getting the drive out of corners. And I also have noticed a marked increase in attention from the ladies. So lap times are down and my lovelife is up! Thanks HM. (Posted on 24/03/16)

  3. Amazing product and service Review by Chris
    Bang for Buck
    Performance
    Quality Finish

    Amazing product. Amazing service and support. Ordered in the arvo and it was on my doorstep the next morning. Highly recommend. (Posted on 1/10/15)

  4. Awesomeness! Review by Zak44
    Quality Finish
    Bang for Buck
    Performance

    Bought this product about 8 months ago and actually had an issue with the first one sent. H&M has great customer service and sent me out a brand new unit. I installed the new one and it works great! This product is freaking awesome! No sport bike should be without. (Posted on 21/05/15)

  5. Good value Review by Mat
    Quality Finish
    Bang for Buck
    Performance

    Just plugs straight in. Works just how it should, can't ask for anymore. The guys at HM were really quick to post it too and called to make sure I had ordered the right length rod which was good. The unit is 55mm long so subtract that from whatever length shift rod you are currently using. (Posted on 28/10/14)

  6. Excellent product Review by Gilesy #66
    Quality Finish
    Bang for Buck
    Performance

    1st time I have used a quickshifter and i'm glad its a HM. Easy to fit, practice day, did 3 laps and I was already used to it. Hold it flat and change gears... how easy!!
    Cant believe I waited all year to buy one. Great product!!! (Posted on 12/08/14)

Write Your Own Review

You're reviewing: Hm Quickshifter Super Lite Kawasaki Zx-6R

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Bang for Buck
Performance
Quality Finish

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any Question?  

Question: What is the time preset to kill ignition between gear changes? thanks 12 Nov, 2014
Answer: Hi Guto, Kill time is approx 60ms for this model. Thank you.
Google+