NOTE: We are currently unavailable from January 15th through to January 22nd. Orders placed within this period will be shipped out on the 23rd of January. Thank you.

Select Your Currency

Quickest, Smoothest gear changes with a Hm Quickshifter. Fast worldwide shipping!!

Shopping Cart

Hm Quickshifter YEC

Quick Overview

Yamaha YEC Hm Quickshifter. For all Yamaha YEC Kit Loom fitted bikes including R6 and R1 2008 onwards. For bike setup and shift rod length please refer to the Bike Setup and Specifications tab below.

Availability: In stock

Hm Quickshifter Motorcycle Quickshifter Australia Motorcycle Quickshifter Kits

Approx delivery times: Australia 2-5 Days, International 3-10 Days

Frequently Asked Questions | Install Guide | Setup and Settings

Shipping & Returns | Privacy Policy | Price Match Guarantee

* Required Fields



This is a shifter designed specifically for Yamaha YEC kit ECU’s 2008 onwards.

Most bikes and ignition systems take the ecu’s quickshifter signal wire to GROUND to initiate a shift, however the YEC is different in that the ecu’s signal wire must be taken to 5v to initiate a shift, and this is why there is a specific shifter for the YEC ecu’s.

Wiring: THIS SHIFTER is designed for use by race teams that their own, or access to a wiring technician.

It is EASY to wire this shifter incorrectly and permanently damage the shifter, so unless you are very confident in doing this, and are armed with a wiring diagram, then you should not attempt to fit one of these shifters. Incorrect wiring damage is not covered by warranty. In this case use a HM Quickshifter PLUS YK which has a very simple fitment.

To connect the YEC shifter to the YEC loom, the following needs to be done:

Find the shifter connector on the YEC loom. This is a two pin connector. One of these wires is connected to the 5v power supply for all sensors. DO NOT CONNECT the HM Quickshifter to this wire. It is easy to identify this wire because it will have the same colour coding as wires going to other sensors on the bike. The other wire in this connector is the quickshifter signal wire (confirm this by looking it up on the wiring diagram), connect this wire to the Green/White wire on the HM Quickshifter YEC.

Now put the Red Wire to a switch 12v positive and the black to a good earth (NOT the CAM COVER).

To determine the shift rod length required, please measure the rod only as per the last photo above. For example if that measurement is 200mm then you will be required to order a 150mm rod. Therefore once our sensor (50mm) and the shift rod supplied are mounted together the overall length as the current rod on your motorcycle will be the same. In this example 200mm. If your shift rod has 2 male ends, then measure between the 2 threaded sections only and likewise minus 50mm from that measurement.


Hm Quickshifter Plus Demo

Write Your Own Review

You're reviewing: Hm Quickshifter YEC

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Bang for Buck
Quality Finish

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)

Do you have any Question?